AZTCOFW / DOCUMENTATION
Routing Internet Traffic Through A Site-To-Site OpenVPN Tun- nel
Configuration guides, troubleshooting and practical advice for AZTCOFW.
Articles
4 resultsConfigure firewall rules at Site B
From the Firewall menu, choose Rules . Open the WAN tab, unless using a different interface for the VPN connection. Click on the + button to add a new rule. Enter these values: Action Pass Disabled not checked Interface
Set up OpenVPN at Site B
From the VPN menu choose OpenVPN . On the page under the Server tab, click the + button to create a new OpenVPN server. Enter these values: Sever Mode Peer to Peer (Shared Key) Protocol UDP Device Mode tun Interface WAN
Set up outbound NAT at Site B
From the Firewall menu, choose NAT and click on the Outbound tab. Select Manual Outbound NAT rule genera- tion (AON – Advanced Outbound NAT) and click Save . On the next page, click Apply Changes . A couple of rules are
Set up the client at site A
From the VPN menu choose OpenVPN and go to the Client tab. Click the + button to configure a client. Enter these values: Disabled not checked Server Mode Peer to Peer (Shared Key) Protocol UDP same as Site B Device mode